IFRS 20 takes effect in 2029. Are you ready?

IFRS 20 Regulatory Assets and Regulatory Liabilities

  • Insight
  • November 12, 2026

What is IFRS 20?

On May 27, 2026, the International Accounting Standards Board issued a new International Financial Reporting Standard (IFRS®) Accounting Standard - IFRS 20 Regulatory Assets and Regulatory Liabilities. IFRS 20 is a new accounting standard for companies subject to a specific type of rate regulation.

The standard aims to reflect the effects of rate regulation in financial statements by recognizing the compensation a regulated entity earns when services are provided, rather than when amounts are billed to customers. This helps users understand how rate regulation affects the entity’s financial performance, financial position, and expected future cash flows. 

Which organizations does IFRS 20 affect?

Utilities and energy (electricity, gas, water, thermal), transmission and distribution, pipelines, transport infrastructure, and service concession operators applying International Financial Reporting Interpretations Committee (IFRIC®) 12 may be affected by IFRS 20.

Even partial exposure counts. IFRS 20 scope attaches to the regulatory assets and liabilities that exist, not to the entity. So even if only a portion of your operations is subject to rate regulation and only a handful of regulatory balances arise, your company is still in scope of IFRS 20.

IFRS 20 diagram showing how the difference between total allowed compensation and IFRS 15 revenue creates regulatory income or expenses and corresponding regulatory assets or liabilities.

The regulator

sets out the Regulatory agreement

that governs the Regulated entity.

The Customer

pays Regulated rates to the regulated entity.

IFRS 20 overlay. The calculation is:

Total allowed compensation for the period, which the regulated entity is entitled to,

minus

Revenue
[under existing IFRS 15 recognition standard]
 from regulated rates,

equals the difference, which is presented in the financial statements as follows.

In the Income statement:

Revenue or income

plus

Regulatory income and expenses.

In the Balance sheet:

Cash or receivables

plus

Regulatory assets and liabilities.

Why does IFRS 20 matter?

Current IFRS reporting has a regulated entity’s revenue reflecting what it can bill customers in the current year—not what the regulator has agreed it should earn. When these don’t align, the gap is invisible in financial statements.

IFRS 20 straightens that alignment through a model that requires an entity to recognize the total allowed compensation the regulator permits for the goods or services it supplied to customers in the period as part of that period’s performance. Amounts billed but not yet earned become regulatory liabilities.

The implementation of IFRS 20 isn’t just an accounting change. It’s a transformation. 

 

  • Systems, processes, and controls will need to be reimagined from the ground up.
  • Regulators will need to rethink their approach to rate setting.
  • True sector-wide comparability is becoming a reality.

Find out how PwC Canada's IFRS 20 specialists can support your transition journey.

How does IFRS 20 work?

IFRS 20 operates as an overlay standard. Companies first apply existing IFRS Accounting Standards, such as IFRS 15 Revenue from Contracts with Customers, and then apply IFRS 20 to the enforceable rights and obligations that remain unaccounted for.

Diagram: what rate regulation establishes

IFRS 20 diagram showing how differences in the timing of allowed compensation can result in regulatory assets or liabilities.

Rate regulation establishes:

  • The compensation a company is entitled to charge customers for regulatory goods or services supplied in a period (total allowed compensation).

  • When the company can charge that compensation to customers through regulated rates:

    • In the period of supply.

      Outcome: No difference in timing.

    • In a different period from the period of supply.

      Outcome: Difference in timing arises. Regulatory assets or regulatory liabilities are recognized to provide complete information about compensation for goods or services supplied in the period.

Where part or all of the total allowed compensation for regulatory goods or services supplied to customers is earned in a different period from when IFRS 15 revenue is recognized, IFRS 20 requires recognition of:

  • Regulatory asset: An enforceable present right to add an amount to future regulated rates for goods or services already supplied but not yet in IFRS 15 revenue

  • Regulatory liabilities: An enforceable present obligation to deduct an amount from future regulated rates because compensation for future supply is already in IFRS 15 revenue

  • Regulatory income / expense: The resulting effect on financial performance in the period of supply

What IFRS 20 implementation means for Canadian utilities

IFRS 14 Regulatory Deferral Accounts allowed certain Canadian companies within its scope to continue to account for regulatory deferral balances in accordance with their previous Generally Accepted Accounting Principles (GAAP) when they adopted IFRS. With the release of IFRS 20, these entities will be required to make sure all rate-regulated balances are recorded in accordance with IFRS 20.

A shift to IFRS 20 isn’t a relabelling exercise, as the two frameworks start from fundamentally different premises. Moving from Accounting Standards Codification 980 Regulated Operations’ (ASC 980’s) cost-recovery model to IFRS 20’s total allowed compensation model will change what you recognize, the amount you recognize, and what you disclose.

Four key changes Canadian utilities should expect when moving from ASC 980 to IFRS 20

ASC 980 asks whether you’ll recover a cost through future rates. IFRS 20 asks whether your regulatory agreement gives you an enforceable right or obligation arising from a timing difference. Some of today’s balances won’t pass that test, and IFRS 20 will bring in new ones because it isn’t limited to recovering costs you’ve already incurred.

Moving from incurred cost to a discounted cash-flow technique requires the regulatory interest rate for each balance, specified or implied, plus a defensible view of the agreement’s boundary and cash-flow estimates. Where the regulatory agreement provides no compensation for delay, the rate is zero.

Municipal utilities, co-ops, and other entities whose own boards set rates can qualify for ASC 980. Self-regulation is outside the scope of IFRS 20. Setting your own rates can still work, but only within a legal and regulatory pricing framework under an enforceable regulatory agreement, for example, where the way you apply that framework is overseen or approved by a body required by law to do so.

ASC 980 doesn’t require you to prove a “direct relationship” between your regulatory capital base and the assets behind it. IFRS 20 does. You need to track how regulatory depreciation relates to specific assets, by amount and by period, at no higher level than an IFRS asset class. If you can’t show that link, the balance can’t be recognized.

The ripple effects of applying IFRS 20 across your organization

The road to IFRS 20 adoption has far-reaching implications for your organization. It’s critical to communicate effectively across affected stakeholder groups to act quickly throughout the transition.

Financial reporting

  • Transactional and operational accounting implications
  • External reporting and disclosures
  • Consolidation

 

Internal audit

  • Internal controls and process updates
  • Additional systems in scope of Internal Control over Financial Reporting (ICFR)
Information technology
  • Review of existing financial applications:
    • Enterprise resource planning
    • Enterprise performance management
    • Consolidation tool sets
Financial planning and analysis
  • Internal reporting metrics
  • Budget and forecast revisions
Investor relations
  • Communication strategy
  • Peer benchmarking
  • Management discussion and analysis updates

Two frameworks, three transitions

Entities already reporting under IFRS 14 can take advantage of the targeted relief offered through the modified retrospective approach. This includes the ability to apply the borrowing-cost regulatory return requirements only to assets not yet available for use at transition, to disregard implied regulatory interest rates derived before transition, and to use hindsight in estimating cash flows.

Entities reporting under IFRS but not applying IFRS 14 will now be required to apply the new IFRS 20 standard if they determine they’re in scope. This will impact companies that haven’t applied IFRS 14 or ASC 980 but are subject to a regulatory body and regulatory agreement, including contractual licensing agreements, service concession arrangements, and other sets of rights and obligations specified by law or regulation.  

Entities required to convert from US GAAP to IFRS will also apply IFRS 1 and should plan the two workstreams together rather than sequentially.

Request an ASC 980 to IFRS 20 gap assessment

Our practical path to IFRS 20 adoption 

Regulatory specialists and financial reporting teams have rarely had to work together at this level of detail. Building that interface early, as a process and not a series of ad hoc consultations, is the single biggest predictor of a smooth adoption. 

  • Scope by business unit, jurisdiction, and commodity. 

  • Test scope criteria against each regulatory agreement. 

  • Assess the direct relationship between the regulatory capital base and IAS 16 Property, Plant, and Equipment. 

  • Quantify indicative effects.  
  • Train your organization with Continuing Professional Development (CPD)-eligible training sessions for the accounting function and upskilling sessions for affected groups (financial planning and analysis, investor relations, and IT).

  • Identify affected IT systems and processes. 

  • Assess fit and gaps against future requirements. 

  • Categorize change as configuration, in-house development, or new

    solution—with an indicative effort estimate.

  • Define workstreams, roles, governance, and quality gates. 

  • Build a milestone plan to first application with key paths and decision points identified.

  • Develop accounting policies and position papers, measurement models, disclosure templates, controls, comparative-period data capture, and dry-run reporting.

Book an IFRS 20 readiness conversation

Let us help with your IFRS 20 implementation

Through IFRS 9, 15, 16, and 18, we’ve helped organizations adopt major new standards, and we’re bringing that experience to IFRS 20. Our specialists lead PwC’s Global IFRS 20 Working Groups, sit on Accounting Standards Board Transition Resource Groups, and work alongside rate regulation practitioners in a single team.

With a market-leading Canadian utilities practice and more than 27,000 energy professionals globally, we can support you wherever you report and operate.  

Follow PwC Canada

Required fields are marked with an asterisk(*)

Your personal information will be handled in accordance with our Privacy Statement. You can update your communication preferences at any time by clicking the unsubscribe link in a PwC email or by submitting a request as outlined in our Privacy Statement.

Contact us

Mia Barron-D'Souza

Mia Barron-D'Souza

Leader of PwC Canada's Complex Accounting and Regulatory Services Practice; Global Secretary of PwC's IFRS 20 Technical Advisory Group, PwC Canada

Deanna Louth

Deanna Louth

Partner, National and Global Corporate Reporting Services; Global Leader of PwC’s IFRS 20 Working Group, PwC Canada

Scott Bandura

Scott Bandura

Partner, National and Global Corporate Reporting Services; Leader of PwC’s Global Accounting Group for the Energy, Utilities, and Mining sectors, PwC Canada

Kirsten Baker

Kirsten Baker

Energy & Utilities Leader, PwC Canada

Tel: +1 403 714 2681

Hide